Accessibility links

 
 
  • CPU and Memory
  • Storage
  • Video and Audio
  • Networking and I/O
  • Build and Power

 

CPU and Memory

Trim-Slice is based on NVIDIA Tegra 2 – featuring a dual-core ARM Cortex A9 1 GHz processor with ultra-low-power GeForce GPU with 1 GB DDR2 RAM soldered on-board.

 

Storage

Trim-Slice offers both SATA and dual SD for storage. Trim-Slice Pro incorporates a built-in 32 GB Sata SSD, while Trim-Slice H accepts standard 2.5″ SATA hard disk. All Trim-Slice models have an SD slot on the front and additional micro-SD slot behind a secured door on the side (pictured). Both SD ports support SDHC up to 32 GB.

 

Video and Audio

Trim-Slice supports HDMI 1.3a 1080p and a 2nd DVI-D port supporting resolution up to 1680 x 1050. 5.1 channels audio is available through HDMI and through S/PDIF. In addition there are standard 3.5mm jacks for stereo line-out and line-in. Analog video input port will be made available in the future when SW support for the feature becomes available. Please note Adobe Flash is not supported at the moment.

 

Networking and I/O

Trim-Slice has a Gigabit Ethernet port – implemented through one of the Tegra 2 PCIe ports and a built-in 802.11n WiFi. Bluetooth is provided as a USB dongle. Trim-Slice incorporates 4 USB 2 ports – two on the back and two on the front. On the front panel there is a micro-USB connector for USB device, and a mini connector for RS232.

 

Build and Power

Trim-Slice is built into an all metal case of 5.1 x 3.7 x 0.6 inches (130mm x 95mm x 15mm). Trim-Slice power supply is 12V DC (8V-16V tolerant) Power consumption is 2-6W depending on devices in use, operating system and CPU/graphics load required by the application.


Want to ask us something?

 
Name:
 
Email:
 
Telephone:
  Enquiry:
 
Enter the value in the image in the field below